HLLY TVX-50M VHF-UHF Analog tv transmitter + Power + Antenna Black

Description

HLLY TVX-50M VHF-UHF Analog tv transmitter board + Power + Antenna
Package include:
1. HLLY TVX-50M
tv transmitter;
2.12V Power supply;
3. Antenna.
About Shipping:  SpeedPAK From China, shipping cost is .8,
shipping time is about 10 to 14 business days!
Features
:
•
Integrated on-chip programmable UHF oscillator
• No external varicaps diodes/inductor or tuned components
• Extremely low external component count
• Channel 21–69 UHF operation
• VHF range possible by internal dividers (30–450 MHz)
• Boosted TVOUT level (82 dB
ì
V typical)
• High-speed read and write I
2
C
bus compatible (800 kHz)
• I
2
C
address selectable by pin (four choices) using external resistor (available only in QFN20
package)
• I
2
C
bus 5- and 3.3-V compatible
• Fixed video modulation depth (93% typical in system L and 82% typical in the other standards)
• Peak white clip disabled by bus
• Programmable picture/sound carrier ratio (12 and 16 dB)
• Integrated on-chip programmable sound subcarrier oscillator (4.5, 5.5, 6.0 and 6.5 MHz)—no
external varicaps
• Programmable sound reference frequency (31.25 and 62.5 kHz)
• Direct RF sound modulator input (FM and AM modulator bypassed) for NICAM or stereo sound
applications (available only in QFN20 package)
• On-chip video test pattern generator with sound test signal (1 kHz)
• Low-power programmable modulator standby mode
• Transient output inhibit during PLL lock-up at power-on
• Logical output port controlled by bus
• ESD protection, minimum 4 KV
FAQ:
Q: What is the transmission power of this device?
A:  The transmitter power is 50mW.
Q:What is the maximum open field range of this device in meters?
A: The maximum open field range of this device is about 50meters.
Attention
:
1
Must connect the antenna before power on!
2
Make sure the antenna operating frequency and operating frequency to match the transmitter
，
Otherwise it may affect the normal operation of the transmitter because the standing wave is too large!
3
Make sure the power supply is strong enough for the Fm transmitter!